Iranian Chemical Engineering Journal

Investigation of Ventilator’s Polymeric Split Filter Production with Injection Molding Process Using Autodesk Moldflow Software

Volume 21, Issue 124, November and December 2022, Pages 30-42

10.22034/ijche.2022.311107.1145

M. H. Zamani; A. H. Yazdanbakhsh; H. Hosseini Sharifi

Preparation and Evaluation of Physico-Chemical and Antimicrobial Properties of Alcoholic Extract of Propolis

Volume 20, Issue 119, March and April 2022, Pages 31-40

10.22034/ijche.2021.280661.1102

A. Ezazi Maleki; A. Javadi; H. Jafarizadeh-Malmiri; H. Mirzaei

Two-Dimensional Heterogeneous Simulation of Methan Steam Reforming Catalytic Reactor

Volume 18, Issue 103, July and August 2019, Pages 32-40

A. R. Khaje-Amiri; M. Khaje-Amiri

A Study of Nanoparticles Application in Different Oil and Gas Reservoir Rock Types

Volume 17, Issue 97, July and August 2018, Pages 32-43

Optimization of the SO3 Content of an Algerian Portland Cement: Study on the Effect of Various Amounts of Gypsum on Cement Properties

Volume 17, Issue 100, January and February 2019, Pages 32-46

Removal of Chromium (VI) from Synthetic Wastewater by Using Cellulose Adsorbent

Volume 21, Issue 120, March and April 2022, Pages 35-46

10.22034/ijche.2021.277136.1100

F. Akhlaghian; Sh. Moradi

Biosorption of Cadmium Ions from Aqueous Solution by Using Padina Australis Brown Algae

Volume 17, Issue 98, September and October 2018, Pages 38-51

Experimental Study of the Effect of Ammonium Perchlorate Oxidizer Particle Size Distribution on Physical, Mechanical and Combustion Properties of HTPB-Based Composite Solid Propellant Containing 19 wt.% of Aluminum

Volume 22, Issue 131, March and April 2024, Pages 38-48

10.22034/ijche.2023.370467.1254

S. R. Taghavi; M. A. Dehnavi

An Extensive Review on Spent Caustic Treatment Methods in Oil and Gas Industry

Volume 17, Issue 96, May and June 2018, Pages 39-55

A Review of Applications and Methods of Preparation of Magnesium Hydroxide and its Effective Factors

Volume 22, Issue 126, March and April 2023, Pages 39-54

10.22034/ijche.2022.322850.1168

N. Esfandiari; T. Soleymani; M. Javidfar

Drying of Shitake Mushrooms Using a Combination of Convective-Infrared Dryer

Volume 22, Issue 127, May and June 2023, Pages 39-54

10.22034/ijche.2022.329279.1179

M. Delangiz; M. Shahiri Tabarestani; K. Movagharnejad

Effect of Surfactants on the Vacuum Filtration in the Dewatering Process from Iron Concentrate Slurry

Volume 22, Issue 129, November and December 2023, Pages 39-49

10.22034/ijche.2022.348558.1218

S. Habibi Nezhad; S. Ghaffari; R. Rezazadeh; A. Hajizadeh; M. Mehdi Afsahi

Computation of Gaseous Chemical Equilibrium of Reforming Reaction Using Numerical Methods

Volume 17, Issue 101, March and April 2019, Pages 41-49

An Investigating on Parameters Affecting the Size and Size Distribution of the Precipitated Oxalate Particle Size in a Stirred Tank Reactor

Volume 17, Issue 99, November and December 2018, Pages 43-53

On the Heat Transfer Control Methods in Temperature Regulating Textiles

Volume 22, Issue 130, January and February 2024, Pages 43-70

10.22034/ijche.2023.354821.1228

Z. Zarezade; A. Beshart; M. Atighi; Sh. Zohari; Z. Alizadeh; M. Hasanzadeh

An Investigation into the Effect of Key Parameters on COD Reduction in Synthetic Wastewater with Detergents Using Electrocoagulation Process

Volume 23, Issue 132, May and June 2024, Pages 44-55

10.22034/ijche.2023.368645.1250

A. Rostami; B. Pourtalebi; S. M. Abdoli; A. Akbari

Simulation of Fouling Phenomenon in Low Density Polyethylene Reactor in Kurdistan Petrochemical Company

Volume 22, Issue 128, July and August 2023, Pages 52-66

10.22034/ijche.2022.317156.1157

S. Karimi; R. Beigzadeh

Study of Water Vapor Absorption from Gas Using Tetra-Ethylene Glycol (TREG)

Volume 21, Issue 125, January and February 2023, Pages 57-68

10.22034/ijche.2022.319813.1163

Mohammad Mehdi kaibollahi; P. Keshavarz

Convergence Procedure of Methane Gas Hydrate Equilibrium Calculation in HV and HLW Equilibrium

Volume 9, Issue 51, November and December 2010

Neural Network Modeling of the Process of Extraction from Mobile Printed Circuit Boards by Lemon Juice Organic Acids

Volume 21, Issue 121, July and August 2022, Pages 21-32

10.22034/ijche.2021.284629.1112

R. Ozairy; R. Beigzadeh; S. O. Rastegar

The Most Frequently Used Polymers in Skin Wound Healing Hydrogels-Part One

Volume 21, Issue 123, November and December 2022, Pages 32-44

10.22034/ijche.2021.295189.1126

M. Yaghoobi

Techniques for Preparation of Porous Polymer Particles: Recent Achievements

Volume 21, Issue 122, September and October 2022, Pages 35-51

10.22034/ijche.2021.294870.1125

Z. Daneshfar

Chemical Exposure Risk Assessment Using Semi-Quantitative Risk Assessment Method (Case Study: Automobile Tire Manufacturing Factory)

Volume 18, Issue 103, July and August 2019, Pages 41-52

D. Kahforoushan; P. Mashkouri; M. Mohammadi

Experimental Investigation of Shelled Corn Drying in Rotary Dryer With Experimental Design Software

Volume 18, Issue 102, May and June 2019, Pages 41-49

R. Matto; S. Nanvakenari; K. Movagharnejad

Investigation about Tetracycline Removal from Aqueaus Solution by Hybrid Technology Plasma Water Falling Film-Synthesized Zeolite with Different Na2O/SiO2 Ratio

Volume 20, Issue 119, March and April 2022, Pages 41-52

10.22034/ijche.2021.281117.1103

L. Feyzi; N. Rahemi; S. Allahyari

Journal Archive

Volume 23 (2024)

Volume 22 (2023)

Volume 21 (2022)

Volume 20 (2021)

Volume 19 (2020)

Volume 18 (2019)

Volume 17 (2018)

Volume 16 (2017)

Volume 15 (2016)

Volume 14 (2015)

Volume 13 (2014)

Volume 12 (2013)

Volume 11 (2012)

Volume 10 (2011)

Volume 9 (2010)

Volume 8 (2009)

Volume 7 (2008)