[1] Zeynep Ulker, D. S., Can Erkey. (2014). Supercritical Fluid Technology for Energy and Environmental Application (M. F. Vladimir Anikeev, Ed. 1 ed.). https://doi.org/https://doi.org/10.1016/C2012-0-00267-0
[2] Economidou, M., Todeschi, V., Bertoldi, P., D'Agostino, D., Zangheri, P., & Castellazzi, L. (2020). Review of 50 years of EU energy efficiency policies for buildings. Energy and Buildings, 225, 110322. https://doi.org/https://doi.org/10.1016/j.enbuild.2020.110322
[3] Yousefi Amiri, T., Bargozin, H., & Mahmoudi, R. (2018). Aerogel-Based Renders and Plasters as New Insulating Materials in Buildings, Iranian Chemical Engineering Journal, 17(97), 76-85, 2018 , [In Persian]. [In Press]. Available: https://www.ijche.ir/article_112627_b6409fdd6e2d6fbc4341ef1f1882363e.pdf
[4] Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., Muraza, O., & Aditiya, H. B. (2017). A review on insulation materials for energy conservation in buildings. Renewable and Sustainable Energy Reviews, 73, 1352-1365. https://doi.org/https://doi.org/10.1016/j.rser.2017.02.034 .
[5] Evangelisti, L., Guattari, C., & Rubeis, T. d. (2021). Preliminary analysis of the influence of environmental boundary conditions on convective heat transfer coefficients. Journal of Physics: Conference Series, 1868(1), 012024. https://doi.org/10.1088/1742-6596/1868/1/012024.
[6] Li, C., Li, B., Pan, N., Chen, Z., Saeed, M. U., Xu, T., & Yang, Y. (2016). Thermo-physical properties of polyester fiber reinforced fumed silica/hollow glass microsphere composite core and resulted vacuum insulation panel. Energy and Buildings, 125, 298-309. https://doi.org/https://doi.org/10.1016/j.enbuild.2016.05.013.
[7] Lakatos, Á., & Kovács, Z. (2021). Comparison of thermal insulation performance of vacuum insulation panels with EPS protection layers measured with different methods. Energy and Buildings, 236, 110771. https://doi.org/https://doi.org/10.1016/j.enbuild.2021.110771.
[8] Cuce, E., Cuce, P. M., Wood, C. J., & Riffat, S. B. (2014). Toward aerogel based thermal superinsulation in buildings: A comprehensive review. Renewable and Sustainable Energy Reviews, 34, 273-299. https://doi.org/https://doi.org/10.1016/j.rser.2014.03.017.
[9] Baetens, R., Jelle, B. P., Thue, J. V., Tenpierik, M. J., Grynning, S., Uvsløkk, S., & Gustavsen, A. (2010). Vacuum insulation panels for building applications: A review and beyond. Energy and Buildings, 42(2), 147-172. https://doi.org/https://doi.org/10.1016/j.enbuild.2009.09.005.
[10] Kim, J. -H., Kim, S. -M., & Kim, J. -T. (2017). Simulation Performance of Building Wall with Vacuum Insulation Panel. Procedia Engineering, 180, 1247-1255. https://doi.org/https://doi.org/10.1016/j.proeng.2017.04.286.
[11] Kalnæs, S. E., & Jelle, B. P. (2014). Vacuum insulation panel products: A state-of-the-art review and future research pathways. Applied Energy, 116, 355-375. https://doi.org/https://doi.org/10.1016/j.apenergy.2013.11.032.
[12] Alam, M., Singh, H., & Limbachiya, M. C. (2011). Vacuum Insulation Panels (VIPs) for building construction industry – A review of the contemporary developments and future directions. Applied Energy, 88(11), 3592-3602. https://doi.org/https://doi.org/10.1016/j.apenergy.2011.04.040.
[13] Mao, S., Kan, A., & Wang, N. (2020). Numerical analysis and experimental investigation on thermal bridge effect of vacuum insulation panel. Applied Thermal Engineering, 169, 114980. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2020.11498.
[14] Yamamoto, H., & Ogura, D. (2021). Dependence of gas permeation and adsorption on temperature in vacuum insulation panels (VIPs) containing getter materials. Journal of Building Physics, 45(5),
604-628. https://doi.org/10.1177/17442591211017154.
[15] Di, X., Xie, Z. g., Chen, J., & Zheng, S. (2020). Residual gas analysis in vacuum insulation panel (VIP) with glass fiber core and investigation of getter for VIP. Building and Environment, 186, 107337. https://doi.org/https://doi.org/10.1016/j.buildenv.2020.107337.
[16] Yu, W. S., Zhu, Z. W., Chen, J., & Zheng, Q. (2016). Synthesis of the Getter for Vacuum Insulation Panels (VIPs) used on Marine Reefer Containers. MATEC Web of Conferences, 67, 06105. https://doi.org/10.1051/matecconf/20166706105.
[17] Liang, Y., Wu, H., Huang, G., Yang, J., & Ding, Y. (2017). Prediction and Optimization of Thermal Conductivity of Vacuum Insulation Panels with Aerogel Composite Cores. Procedia Engineering, 205, 2855-2862. https://doi.org/https://doi.org/10.1016/j.proeng.2017.09.909.
[18] Resalati, S., Okoroafor, T., Henshall, P., Simões, N., Gonçalves, M., & Alam, M. (2021). Comparative life cycle assessment of different vacuum insulation panel core materials using a cradle to gate approach. Building and Environment, 188, 107501. https://doi.org/https://doi.org/10.1016/j.buildenv.2020.107501.
[19] Liang, Y., Wu, H., Huang, G., Yang, J., & Wang, H. (2017). Thermal performance and service life of vacuum insulation panels with aerogel composite cores. Energy and Buildings, 154, 606-617. https://doi.org/https://doi.org/10.1016/j.enbuild.2017.08.085.
[20] Tenpierik, M. (2010). Vacuum Insulation Panels Applied in Building Constructions. Singelstraat 1c.
[21] Tao Xie, Y.-L. H., Zi-Jun Hub. (2012). Theoretical study on thermal conductivities of silica aerogel composite insulating material. International Journal of Heat and Mass Transfer, 58, 540–552. https://doi.org/http://dx.doi.org/10.1016/j.ijheatmasstransfer.2012.11.016.
[22] Demko, J., Fesmire, J. E., & Shu, Q. S. (2022). Cryogenic Heat Management. CRC Press. https://books.google.com/books?id=GUC9zgEACAAJ.
[23] Yousefi Amiri, T., Bargozin, H., Farhadipour, M., & Jamali, Z. (2021), Polycarbonate sheets filled with silica aerogel: new lighting with thermal insulation properties to reduce energy consumption in buildings, Nashrieh Shimi va Mohandesi Shimi Iran (NSMSI), 40(1), 349-358, [In Persian]. [In Press]. Available: https://www.nsmsi.ir/article_36161.html
[24] Yousefi Amiri, T., Bargozin, H., & Moghaddas, J. S. (2020) "Aerogel-Based Renders and Plasters as New Insulating Materials in Buildings, Iranian Chemical Engineering Journal, 19(108), 49-69, [In Persian]. https://www.ijche.ir/article_113411_cb0c06d23a37d3c53a1b73a87f1c1e89.pdf
[25] Gonçalves, M., Simões, N., Serra, C., & Flores-Colen, I. (2020). A review of the challenges posed by the use of vacuum panels in external insulation finishing systems. Applied Energy, 257, 114028. https://doi.org/https://doi.org/10.1016/j.
apenergy.2019.114028.
[26] Deng, B., Yang, S., Xie, X., Wang, Y., Bian, X., Gong, L., & Li, Q. (2019). Study of the thermal performance of multilayer insulation used in cryogenic transfer lines. Cryogenics, 100, 114-122. https://doi.org/https://doi.org/10.1016/j.cryogenics.2019.01.005.
[27] Jang, C., Kim, J., & Song, T. -H. (2011). Combined heat transfer of radiation and conduction in stacked radiation shields for vacuum insulation panels. Energy and Buildings, 43(12), 3343-3352. https://doi.org/https://doi.org/10.1016/j.enbuild.2011.08.036.
[28] Caltagirone, J. -P. (2023). Conservation of mass-momentum-energy versus conservation of acceleration. https://hal.science/hal-04148140
