[1] Shah, R. K., Subbarao, E. C., Mashelkar, R. A., "Heat transfer equipment design", CRC Press, Washington DC, (1988).
[2] Melo, L., Bott, T. R., Bernardo, C. A., "Fouling science and technology", Springer Science & Business Media. Vol. 145, (2012).
[3] Panchal, C. B., "Fouling mitigation of industrial heat exchange equipment", Bengell House, New York, (1997).
[4] Bayat, M., Aminian, J., Bazmi, M., Shahhosseini, S., Sharifi, K., "CFD modeling of fouling in crude oil pre-heaters", Energy Conversion and Management, 64, pp. 344-350, (2012).
[5] Riazi, M. R., Daubert, T. E., "Characterization parameters for petroleum fractions", Industrial & Engineering Chemistry Research. 26, 4, pp. 755-759, (1987).
[6] Scarborough, C. E., Cherrington, D. C., Diener, R., Golan, L. P., "Coking of crude oil at high flux levels", Chem Eng Proc, 75, pp 41-46, (1979).
[7] Panchal, C. B., Kuru, W. C., Liao, C. F., Ebert, W. A., Palen, J. W., " Threshold conditions for crude oil fouling", Understanding Heat Exchanger Fouling and its Mitigation. 273 pp. 272-279, (1999).
[8] Saleh, Z. S., Sheikholeslami, R., Watkinson, A., "Fouling characteristics of a light Australian", Heat Transfer Engineering. Vol. 26, pp.15-22, (2005).
[9] Jafari Nasr, M., Majidi Givi, M., Shafiei, S., "Modeling of crude oil Foul in preheater heat exchangers of atmospheric distillation unit and prediction of Iranian style crude oil Foul with a new model", Proceedings of 9nd National Iranian Chemical Engineering Congress, Tehran, Iran, In Persian, (2004).
[10] Jafari Nasr, M., Nabavi, S., Asgharpour, B., "Modification of crude oil preheater network in order to reduce Foul and increase thermal recovery using thermohydraulic models of Foul", proceedings of the 11nd National Iranian Chemical Engineering Congress, Tehran, Iran, In Persian, (2006).