[1] Dombrowski, P. M., Kakarla, P., Caldicott, W., Chin, Y., Sadeghi, V., Bogdan, D., Barajas-Rodriguez, F., Chiang, S. Y. D., "Technology review and evaluation of different chemical oxidation conditions on treatability of PFAS", Remediation Journal, 28, pp. 135–150, (2018).
[2] Wacławek, S., Silvestri, D., Hrabák, P., Padil, V. V. T., Torres-Mendieta, R., Wacławek, M., Černík, M., Dionysiou, D. D., "Chemical oxidation and reduction of hexachlorocyclohexanes", A review Water Research, 162, pp. 302–319, (2019).
[3] Taylor, S., Zhang, J. F., Eccleston, W., "A review of the plasma oxidation of silicon and its applications", Semiconductor Science and Technology, 8, pp. 1426–1433, (1993).
[4] Wang, J. J., Choi, K. S., Feng, L. H., Jukes, T. N., Whalley, R. D., "Recent developments in DBD plasma flow control", Progress in Aerospace Sciences, 62, pp. 52–78, (2013).
[5] Kong, M. G., Kroesen, G., Morfill, G., Nosenko, T., Shimizu, T., Van Dijk, J., Zimmermann, J. L., "Plasma medicine: an introductory review", New Journal of Physics, 11, pp. 105-112 (2009)
[6] Gui-Min, X., Yue, M., Guan-Jun, Z., "DBD Plasma Jet in Atmospheric", Pressure Argon IEEE Transactions on Plasma Science, 36, pp. 1352–1353, (2008).
[7] Klages, C. P., Höpfner, K., Kläke, A., "Surface Functionalization at Atmospheric Pressure by DBD-Based Pulsed Plasma Polymerization", Plasmas and Polymers, 5, pp. 79–89, (2000).
[8] Kuchenbecker, M., Bibinov, N., Kaemlimg, A., Wandke, D., Awakowicz, P., Viöl, W., "Characterization of DBD plasma source for biomedical applications", Journal of Physics D: Applied Physics, 42, pp. 412-452, (2009).
[9] Li, J., Xiang, Q., Liu, X., Ding, T., Zhang, X., Zhai, Y., Bai, Y., "Inactivation of soybean trypsin inhibitor by dielectric-barrier discharge (DBD) plasma", Food Chemistry, 232, pp. 515–522, (2017).
[10] Neretti, G., Taglioli, M., Borghi, C. A., "Experimental determination and numerical evaluation under simplifying assumptions of the ozone concentration in an atmospheric-pressure air DBD plasma", The European Physical Journal D, 72, pp. 113-120, (2018).
[11] Liang, W. J., Fang, H. P., Li, J., Zheng, F., Li, J. X., Jin, Y. Q., "Performance of non-thermal DBD plasma reactor during the removal of hydrogen sulfide" Journal of Electrostatics, 69, pp. 206–213, (2011).
[12] Liao, X., Liu, D., Xiang, Q., Ahn, J., Chen, S., Ye, X., Ding, T., "Inactivation mechanisms of non-thermal plasma on microbes: A review", Food Control, 75, pp. 83–91, (2017).
[13] Shang, K., Li, J., Morent, R., "Hybrid electric discharge plasma technologies for water decontamination: a short review", Plasma Science and Technology, 21, pp. 403-420, (2019).
[14] Zainuddin, F. A., Md Daud, N., "A Review on Dielectric Barrier Discharge (DBD) Plasma Actuator in Aeronautics Applications", Journal of Advanced Research in Fluid 48, pp. 125–132, (2018).
[15] Amri, D., Nawawi, Z., Jambak, M. I., "The Comparison between types of electrodes in Dielectric Barrier Discharge (DBD) plasma for obtaining potable water: a review", IOP Conference Series: Materials Science and Engineering, 620, pp. 219-221, (2019).
[16] Borcia, G., Anderson, C. A., Brown, N. M. D., "The surface oxidation of selected polymers using an atmospheric pressure air dielectric barrier discharge", Part I Applied Surface Science, 221, pp. 203–214, (2004).
[17] Ren, C. S., Wang, K., Nie, Q. Y., Wang, D. Z., Guo, S. H., "Surface modification of PE film by DBD plasma in air", Applied Surface Science, 255, pp. 3421–3425, (2008).
[18] Louis, R., "Effects of surface morphology and treatment of iron oxide nanoparticles on the mechanical properties of an epoxy coating", Progress in Organic Coatings, 48, pp 123-132, (2015).
[19] Shahmoradi, A. R., Talebibahmanbigloo, N., Javidparvar, A. A., Bahlakeh, G., Ramezanzadeh, B., "Studying the adsorption/inhibition impact of the cellulose and lignin compounds extracted from agricultural waste on the mild steel corrosion in HCl solution", Journal of Molecular Liquids, 304, pp. 112-132, (2020).
[20] Yu, Y. H., Lin, Y. Y., Lin, C. H., Chan, C. C., Huang, Y. C., "High-performance polystyrene/graphene-based nanocomposites with excellent anti-corrosion properties" Polymer Chemistry, 5, pp. 535–550, (2014).
[21] Chen, L., Lu, S., Wu, S., Zhou, J., Wang, X., "Removal of radiocobalt from aqueous solutions using titanate/graphene oxide composites", Journal of Molecular Liquids, 209, pp. 397–403. (2015).
[22] Fan, L., Luo, C., Sun, M., Li, X., Lu, F., Qiu, H., "Preparation of novel magnetic chitosan/graphene oxide composite as effective adsorbents toward methylene blue", Bioresource Technology, 114, pp. 703–706, (2012).
[23] Harfouche, N., Gospodinova, N., Nessark, B., Perrin, F. X., "Electrodeposition of composite films of reduced graphene oxide/polyaniline in neutral aqueous solution on inert and oxidizable metal" Journal of Electroanalytical Chemistry, 786, pp. 135–144, (2017).
[24] Jung, M. R., Horgen, F. D., Orski, S. V., Rodriguez, C. V., Beers, K. L., Balazs, G. H., Jones, T. T., Work, T. M., Brignac, K. C., Royer, S. J., Hyrenbach, K. D., Jensen, B. A., Lynch, J. M., "Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms", Marine Pollution Bulletin, 127, pp. 704–716, (2018).
[25] Hajipour, F., Asad, S., Amoozegar, M. A., Javidparvar, A. A., Tang, J., Zhong, H., Khajeh, K., "Developing a Fluorescent Hybrid Nanobiosensor Based on Quantum Dots and Azoreductase Enzyme for Methyl Red Monitoring", Iranian Biomedical Journal, 111, pp 12-21, (2020).
[26] Rahman, M. M., Khan, S. B., Jamal, A., Faisal, M., Aisiri, A. M., "Iron Oxide Nanoparticles", Nanomaterials, 3, pp. 43–67, (2011).
[27] Atta, A., Al-Lohedan, H., Al-Hussain, S., "Synthesis of Stabilized Myrrh-Capped Hydrocolloidal Magnetite", Nanoparticles Molecules, 19, pp. 11263–11278, (2014).
[28] Toledo, R. R., Santoyo, V. R., Moncada, D., Martínez, M., "Effect of aluminum precursor on physicochemical properties of Al 2O3 by hydrolysis / precipitation method Efecto del precursor de aluminio en las propiedades fisicoquímicas de la γ- Al2O3 por el método hidrólisis", precipitación, 10, pp. 83–99 (2018).
[29] Dehghani, A., Bahlakeh, G., Ramezanzadeh, B., "A detailed electrochemical/theoretical exploration of the aqueous Chinese gooseberry fruit shell extract as a green and cheap corrosion inhibitor for mild steel in acidic solution", Journal of Molecular Liquids, 282, pp. 366-384, (2019).
[30] Zhai, Y., Zhai, J., Wang, Y., Guo, S., Ren, W., Dong, S., "Fabrication of iron oxide core/gold shell submicrometer spheres with nanoscale surface roughness for efficient surface-enhanced Raman scattering", Journal of Physical Chemistry C, 113, pp. 7009–7014, (2009).
[31] Ding, G., Xie, S., Zhu, Y., Liu, Y., Wang, L., Xu, F., "Graphene oxide wrapped Fe3O4@Au nanohybrid as SERS substrate for aromatic dye detection Sensors and Actuators", B: Chemical, 221, pp. 1084–1093, (2015).
[32] Gangwar, J., Gupta, B. K., Tripathi, S. K., Srivastava, A. K., "Phase dependent thermal and spectroscopic responses of Al2O3 nanostructures with different morphogenesis", Nanoscale, 7, pp. 13313–13344, (2015).
[33] Bhattacharjee S., "DLS and zeta potential – What they are and what they are not?", Journal of Controlled Release, 235: pp. 337–351, (2016).
[34] Honary S., Zahir F., "Effect of Zeta Potential on the Properties of Nano-Drug Delivery Systems - A Review (Part 1)", Tropical Journal of Pharmaceutical Research, 12: pp. 255–264, (2013).
[35] Bem, D. S., Lampe-Önnerud, C. M., Olsen, H. P., Zur Loye, H. C.: Synthesis and Structure of Two New Ternary Nitrides: FeWN2 and MnMoN2 Inorganic Chemistry, 35, pp. 581–585, (1996).
[36] Ziletti, A., Carvalho, A., Campbell, D. K., Coker, D. F., Castro Neto, A. H., "Oxygen Defects in Phosphorene", Physical Review Letters, 114, pp. 485-498, (2015).
[37] Glockler, G., "Heats of Dissociation of the N2 Molecule and the NH Radical The", Journal of Chemical Physics, 16, pp. 602–604, (1948).
[38] Van Laer, K., Bogaerts, A., "Influence of Gap Size and Dielectric Constant of the Packing Material on the Plasma Behaviour in a Packed Bed DBD Reactor A Fluid Modelling Study", Plasma Processes and Polymers, 14, pp. 160-179, (2017).