[1] Heinrich, A., Ross, R., Zumwalt, G., Provorse, J., Padmanabhan, V., Aircraft Icing Handbook. 1st edition ,Volume 2., Gates Learjet Corp Wichita KS , Lower Hutt, pp. 24-39 (1991).
[2] Habashi, W. G., "Recent advances in CFD for in-flight icing simulations", Japan Society of Fluid Mechanics, 28(2), pp. 99-118 (2009).
[3] Farzaneh, M., "Ice accretions on high–voltage conductors and insulators and related phenomena", Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences,. 358(1776), pp. 2971-3005, (2000).
[4] Hirata, T., Nagasaka, K., Ishikawa, M., "Crystal ice formation of solution and its removal phenomena at cooled horizontal solid surface: Part I: Ice removal phenomena", International journal of heat and mass transfer, 43(3), pp. 333-339, (2000)
9/0
8/0
7/0
6/0
5/0
4/0
3/0
2/0
1/0
0
|
1/0 05/0 0 05/0- 1/0-
فاصله از مرکز (متر)
|
بازده جمعآوری
جزء جرمی یخ تشکیل شده
بازده تشکیل یخ
|
شکل 7. نرخ تشکیل یخ روی سطح در سرعتهای نسبی مختلف بین هوا و مانع فیزیکی.
[5] Hayashi, R., Yamamoto, M., "Numerical Simulation on Ice Shedding Phenomena in Turbomachinery." International Journal of Energy and Power Engineering, pp. 45-53, (2015).
[6] Silva, G. A. L. d., Silvares, O. D. M., Zerbini, E. J. D. G. J., "Numerical simulation of airfoil thermal anti-ice operation, part 2: implementation and results", Journal of aircraft, 44(2), pp. 634-641, (2007).
[7] Politovich, M. K., "Aircraft icing caused by large supercooled droplets", Journal of Applied Meteorology, 28(9), pp. 856-868, (1989).
[8] Flemming, R. J., Britton, R. K., Bond. T. H., "Model rotor icing tests in the NASA" Lewis Icing Research Tunnel. (1991).
[9] Fortin, G., Perron J., "Spinning rotor blade tests in icing wind tunnel", in 1st AIAA Atmospheric and Space Environments Conference, p. 4260, (2009).
[10] Cui, X., Bakkar, A., Habashi, W. G., "A multiphase SPH framework for supercooled large droplets dynamics", International Journal of Numerical Methods for Heat & Fluid Flow, pp. 101-115, (2019).
[11] Pulley, R., Walters, J., "The effect of interception on particle collection by spheres and cylinders", Journal of aerosol science, 21(6), pp. 733-743, (1990).
[12] Da Silveira, R. A., Maliska, C. R., Estivam, D. A., Mendes, R., "Evaluation of collection efficiency methods for icing analysis", in Proceedings of 17th International Congress of Mechanical Engineering. (2003).
[13] Abdollahi, V., Habashi, W. G., Fossati, M.,
"Multi-phase smoothed particle hydrodynamics modeling of supercooled large droplet dynamics for in-flight icing conditions", Aerospace Science and Technology, 82, pp. 252-261, (2018).
[14] Liu, G. R., Liu M. B., Smoothed particle hydrodynamics: a meshfree particle method. World scientific. Singapore, pp. 110-140, (2003)
[15] Tezduyar, T. "Interface-tracking and interface-capturing techniques for computation of moving boundaries and interfaces", in Proceedings of the Fifth World Congress on Computational Mechanics, (2002).
[16] Lucy, L. B., "A numerical approach to the testing of the fission hypothesis", The astronomical journal, 82, pp. 1013-1024, (1977).
[17] Gingold, R. A., Monaghan J. J., "Smoothed particle hydrodynamics: theory and application to non-spherical stars", Monthly notices of the royal astronomical society, 181(3), pp. 375-389, (1977).
[18] Marrone, S., Antuono, M. A. G. D., Colagrossi, A., Colicchio, G., Le Touzé, D., Graziani, G., "δ-SPH model for simulating violent impact flows", Computer Methods in Applied Mechanics and Engineering, 200(13-16), pp. 1526-1542, (2011).
[19] Kamyabi, M., Ramazani, A., Kamyabi, A., "Transient Analysis of Falling Cylinder in Non-Newtonian Fluids: Further Opportunity to Employ the Benefits of SPH Method in Fluid–Structure Problems", Chemical Product and Process Modeling, 12(1), pp. 29-39 )2017).
[20] Farrokhpanah, A., Bussmann M., Mostaghimi, J., "New smoothed particle hydrodynamics (SPH) formulation for modeling heat conduction with solidification and melting", Numerical Heat Transfer, Part B: Fundamentals, 71(4), pp. 299-312, (2017).
[21] Monaghan, J. J., Huppert, H. E., Worster M. G., "Solidification using smoothed particle hydrodynamics", Journal of Computational Physics, 206(2), pp. 684-705, (2005).
[22] Cleary, P. W., "Extension of SPH to predict feeding, freezing and defect creation in low pressure die casting", Applied Mathematical Modelling, 34(11), pp. 3189-3201, (2010).
[23] Alexiadis, A., Ghraybeh, S., Qiao, G., "Natural convection and solidification of phase-change materials in circular pipes: A SPH approach", Computational Materials Science, 150,
pp. 475-483, (2018).
[24] Zhang, M., Zhang, H., Zheng, L., "Numerical investigation of substrate melting and deformation during thermal spray coating by SPH method", Plasma Chemistry and Plasma Processing, 29(1), pp. 55-68, (2009).
[25] Abdollahi, V., Habashi, W. G., Fossati, M., "Hybrid quasi molecular-continuum modeling of supercooled large droplet dynamics for in-flight icing conditions", in 54th AIAA Aerospace Sciences Meeting, p. 0061, (2016).
[26] Messinger, B. L., "Equilibrium temperature of an unheated icing surface as a function of air speed", Journal of the aeronautical sciences, 20(1),
pp. 29-42, (1953).
[27] Müller, M., Charypar, D., Gross, M., "Particle-based fluid simulation for interactive applications", in Proceedings of the symposium on Computer animation, pp. 154-159, (2003).
[28] Kelager, M., Lagrangian fluid dynamics using smoothed particle hydrodynamics. University of Copenhagen: Department of Computer Science, (2006).