@article { author = {Amirabedi, P. and Akbari, A. and Yegani, R. and Raveshiyan, S.}, title = {Effect of Methyl and Fluorine Grafted Silica Nanoparticles on the Performance of Polypropylene Membrane Contactors}, journal = {Iranian Chemical Engineering Journal}, volume = {19}, number = {108}, pages = {89-100}, year = {2020}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {The use of membrane contactors for acidic gases purification is one of the important advances in engineering processes and environmental protection. Despite the many advantages of membrane contactors, the wetting of membranes is the most important problem in developing this technology. In order to reduce the wetting problem of membranes, in this work, super hydrophobic polypropylene hollow fiber membranes were prepared and their structure and performance were evaluated by various tests. The results of the contact angle measurements showed that for the membranes coated with methyl and fluorine functional group the contact angle increased to 162° and 155°, respectively. The results of Wilson's plot also showed that the mass transfer resistance of pure, methyl-coated and fluorine-coated membranes was 30.78%, 18.79% and 22.45%, respectively. Therefore, methyl-coated membranes have a high potential to be used in membrane contactors.}, keywords = {polypropylene,coating,Superhydrophobic,Membrane Contactors,Wilson's Plot}, title_fa = {تأثیر نانوذرات سیلیکایی پیوندخورده با عامل متیل و فلوئور بر عملکرد تماس‌دهنده‌های غشایی پلی‌پروپیلنی}, abstract_fa = {استفاده از تماس­دهنده­های غشایی برای پالایش گازهای اسیدی یکی از پیشرفت­های مهم در فرایندهای مهندسی و حفاظت از محیط زیست است. باوجود برتری‌های متعدد تماس‌دهنده­های غشایی، تر­شوندگی غشاها مهم­ترین مشکل در گسترش این فناوری به‌شمار می‌رود. در راستای کاهش مشکل تر­شوندگی، در این‌پژوهش، غشاهای الیاف توخالی پلی­پروپیلنی فوق آبگریز تهیه و ساختار و عملکرد غشاها، به‌وسیلۀ آزمون­های مختلف ارزیابی شد. نتایج حاصل از اندازه­گیری زاویۀ تماس، نشان داد که برای غشاهای پوشش­دهی شده با گروه عاملی متیل و فلوئور اندازۀ زاویۀ تماس به‌ترتیب تا °162 و °155 افزایش یافت. همچنین نتایج به‌دست آمده از نمودار ویلسون نشان داد که مقاومتانتقال جرم غشاهای خالص، پوشش­دهی شده با گروه عاملی متیل و فلوئور به‌ترتیب برابر با 78/30% ، 79/18% و 45/22% است. بدین ترتیب غشاهای پوشش­دهی شده با گروه عاملی متیل از پتانسیل بالایی برای کاربرد در تماس­دهنده­های غشایی برخوردار هستند.}, keywords_fa = {پلی‌پروپیلن,پوشش‌دهی,فوق آبگریز,تماس‌دهنده‌های غشایی,نمودار}, url = {https://www.ijche.ir/article_113416.html}, eprint = {https://www.ijche.ir/article_113416_15921e149ccd8868382ee6df4b4a9b6d.pdf} }