@article { author = {یزدانی, فرشاد}, title = {Iranian Institute of Chemistry and Chemical Engineering; Yesterday, Today & Tomarow}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {5-5}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {}, keywords = {}, title_fa = {پژوهشگاه شیمی و مهندسی شیمی ایران؛ دیروز، امروز، فردا}, abstract_fa = {-}, keywords_fa = {}, url = {https://www.ijche.ir/article_106422.html}, eprint = {https://www.ijche.ir/article_106422_ba76d6f1007ac7e559c814e73f3b3ca2.pdf} } @article { author = {Abedpour, M. and Kamyab Moghadas, B.}, title = {Investigation of Removing Ionic Metals of Ni(II) and Cd(II) from Aqueous Solution by a Polyacryl Amid Adsorbent}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {6-19}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {Today, with the expansion of the chemical industry, we see heavy metals enter the surface water and wastewater, which is certainly associated with toxic exposure. Therefore, in this study, a polyacrylamide polymer adsorbent was synthesized for simultaneous removal of nickel and cadmium in an aqueous medium, and the effect of different parameters on simultaneous removal of these two metals was investigated. The optimum conditions for simultaneous removal at pH 4.86, the adsorbent amount of 0.016 g, the contact time of 6.48 minutes and the concentration of nickel and cadmium solutions were 15.01 and 15 mg / l, respectively. The optimum removal rates for nickel and cadmium were 84.5% and 81.03%, respectively. According to the results of this study, polyacrylamide adsorbent can be used as an effective adsorbent in the simultaneous removal of nickel and cadmium from aqueous solutions.}, keywords = {Adsorption,Polyacrylamide Adsorbent,Simultaneous Removal,Nickel (+2),Cadmium (+2)}, title_fa = {بررسی حذف یون‌های فلزات نیکل (2+) و کادمیوم (2+) از محیط آبی به وسیله جاذب پلی آکریل آمیدی}, abstract_fa = {امروزه با گسترش صنایع شیمیایی، شاهد ورود فلزات سنگین به آب‌های سطحی و فاضلاب‌ها هستیم که قطعا قرار گرفتن در معرض این فلزات با مسمومیت همراه است. در این پژوهش، جاذب پلیمری پلی آکریل آمید برای حذف هم­زمان فلزات نیکل و کادمیم در محیط آبی سنتز و اثر پارامترهای مختلف بر حذف هم­زمان این دو فلز بررسی شد. شرایط بهینه برای حذف هم­زمان در 86/4pH ، مقدار جاذب 016/0 گرم، مدت تماس 48/6 دقیقه و غلظت محلول‌های نیکل و کادمیم به ترتیب 01/15 و 15 میلی گرم بر لیتر به دست آمد. همچنین درصد حذف در شرایط بهینه برای فلزات نیکل و کادمیم به ترتیب 5/84 و 03/81 تعیین شد. با توجه به نتایج این تحقیق، جاذب پلی آکریل آمید می‌تواند به عنوان جاذبی مؤثر در حذف هم­زمان فلزات نیکل و کادمیم از محلول‌های آبی استفاده شود.}, keywords_fa = {جذب سطحی,جاذب پلی آکریل آمید,حذف هم‌زمانی,نیکل (2+),کادمیم (2+)}, url = {https://www.ijche.ir/article_106423.html}, eprint = {https://www.ijche.ir/article_106423_cb6acdf7287094d8b4614872eee4e721.pdf} } @article { author = {Ghaemi, A.}, title = {Unsteady-State Film Model: Simultaneous Reactive Absorption of Two Gases}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {20-31}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {In this work, a film model has been developed to describe unsteady state simultaneous absorption of two gases. Film modeling of reactive absorption results in initial boundary-value problem. The analytical solution applied in this work is a combination of the superposition principles and the separation of variables methods. The concentration equations obtained in the model contain two independent variables of time and film width. Therefore, solving the model gives component concentrations at any time or film length. In addition, the partial differential equations were solved numerically. The experimental data were obtained using laboratory packed column. The model results were validated using experimental data. A comparison between the model results and experimental data indicates that the model has good agreement with experimental data.}, keywords = {Film Model,Simultaneous Reactive Absorption of Two Gases,Unsteady-State Modeling}, title_fa = {مدل‌‌سازی ناپایای فیلمی جذب واکنش‌دار هم‌زمان دو گاز}, abstract_fa = {در این پژوهش، یک مدل فیلمی برای توصیف ناپایای جذب هم‌زمان دو گاز طراحی شده است. مدل‌سازی فیلمی جذب واکنش‌دار منجر به معادلات دیفرانسیل پاره­ای با شرایط اولیه و مرزی حاکم بر فیلم می‌شود. روش حل تحلیلی معادلات که در این تحقیق به کار رفته، ترکیبی از دو روش اصل برهم‌نهشتی و جداسازی متغیرها است. معادلات غلظت حاصل از حل تحلیلی معادلات تابع زمان و مختصات فیلم است و می­توان در طول فیلم به‌طور دقیق غلظت و شار انتقال جرم اجزاء را محاسبه کرد. معادلات دیفرانسیل پاره­ای حاصل از مدل‌سازی فیلمی همچنین به روش عددی حل شدند. برای ارزیابی نتایج مدل‌سازی فیلمی، از داده­های تجربی برج پرشده آزمایشگاهی استفاده شده است. نتایج حل تحلیلی و عددی معادلات با نتایج تجربی مقایسه شده که نشان می­دهد مدل ارائه‌شده به خوبی غلظت و شار انتقال جرم اجزاء را در طول فیلم پیش‌بینی می­کند.}, keywords_fa = {مدل‌سازی فیلمی,جذب واکنش‌دار هم‌زمان دو گاز,مدل‌سازی ناپایا}, url = {https://www.ijche.ir/article_106516.html}, eprint = {https://www.ijche.ir/article_106516_0f18ea9ee37eb9a97e8d7aa130f5250d.pdf} } @article { author = {Khaje-Amiri, A. R. and Khaje-Amiri, M.}, title = {Two-Dimensional Heterogeneous Simulation of Methan Steam Reforming Catalytic Reactor}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {32-40}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {In this paper, a two-dimensional heterogeneous reactor model was employed to predict the performance of a methane-steam reformer. External and internal effects for heat and mass transfer were included into the model. The set of coupled differential equations was solved numerically. To study the effects of different parameters, such as temperature, pressure,steam-to-methane ratio,simulation was performed and the results compared against data from an industrial reformer. A good agreement between the simulation and the industrial data is seen, indicating the efficiency of the mathematical model. Also the percentage error was between 1% and 10% for various cases (such as: temperature, pressure and etc.)}, keywords = {Synthesis gas,methane reforming,Heterogeneous Two-Dimensional Model}, title_fa = {شبیه‌سازی دوبعدی هتروژن راکتور کاتالیستی تبدیل متان با بخار آب}, abstract_fa = {در این مقالهیک مدل دوبعدی هتروژن برای پیش‌بینی عملکرد یک راکتور ریفرمینگ متان با بخار آب به کار گرفته شده ‌است. مقاومت‌های خارجی و داخلی برای انتقال جرم و حرارت در دانه کاتالیست برای این مدل در نظر گرفته شده‌ و دستگاه معادلات دیفرانسیل حاصل به روش عددی حل شده‌ است. برای بررسی اثر پارامترهای مختلف مانند دما، فشار، نسبت بخار به متان، شبیه‌سازی‌های مختلفی انجام‌شده و نتایج حاصل از شبیه‌سازی با داده‌های یک راکتور صنعتی مقایسه شد‌ه‌ است. تطابق خوبی میان داده‌های صنعتی و نتایج شبیه‌سازی دیده می‌شود که بیانگر کارایی مدل در پیش‌بینی عملکـرد راکتـور است. همچنین درصد خطای نسبی برای موارد مختلف (دما و فشار و...) 1% تا 10% اندازه‌گیری شده است.}, keywords_fa = {گاز سنتز,ریفرمینگ متان,مدل دوبعدی هتروژن,شبیه‌سازی}, url = {https://www.ijche.ir/article_106519.html}, eprint = {https://www.ijche.ir/article_106519_0c33a31557989288b4e6f87b94f0ea85.pdf} } @article { author = {Kahforoushan, D. and Mashkouri, P. and Mohammadi, M.}, title = {Chemical Exposure Risk Assessment Using Semi-Quantitative Risk Assessment Method (Case Study: Automobile Tire Manufacturing Factory)}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {41-52}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {In this paper, the risk of chemicals existing in one of the automobile tire manufacturing industries has been investigated using a semi-quantitative risk assessment method. This research is based on the pattern which is provided by the Singapore professional health department to assess the risk of chemicals in the factory. The results showed that the tested employees in this study are in contact with 28 different chemicals. Among these chemicals, benzene, vinyl chloride and solvent 410 are at very high risk. Vinyl chloride is used in units of banbury, extruder and semenzeni. Benzene is used in extruder unit and solvent 410 is used in extruder, baking and inspection units. Due to the high-level risk of these chemicals, safety measures should be taken into account in targeted factory as soon as possible to safeguard employees.}, keywords = {Risk Assessment,Automobile Tire Manufacturing Factory,chemicals,Toxicity}, title_fa = {ارزیابی خطر مواجهه با مواد شیمیایی به روش نیمه‌کمی خطر(مطالعه موردی: کارخانه لاستیک‌سازی خودرو)}, abstract_fa = {در این مقاله، خطر مواد شیمیایی موجود در یکی از صنایع تولید تایر خودرو با استفاده از روش ارزیابی نیمه‌کمی خطر، بررسی شده­ است. این پژوهش بر اساس الگوی ارائه‌شده به وسیله دپارتمان بهداشت حرفه­ای سنگاپور برای ارزیابی خطر ناشی از مواد شیمیایی در کارخانه، انجام شده است. نتایج نشان داد که کارکنان بررسی‌شده در این مطالعه، با 28 ماده شیمیایی مختلف در تماس هستند که سه ماده شیمیایی بنزن، وینیل کلراید و حلال 410 خطر بسیار بالا دارند. ماده وینیل کلراید در واحدهای بنبوری، اکسترودر وسمنت­زنی، ماده بنزن در واحد اکسترودر و ماده حلال 410 در واحدهای اکسترودر، پخت و بازرسی استفاده شده که با توجه به بالا بودن سطح خطر این مواد شیمیایی، باید هرچه سریع­تر اقدامات اصلاحی در کارخانه هدف انجام شود تا سلامت کارکنان در خطر نباشد.}, keywords_fa = {ارزیابی خطر,کارخانه لاستیک‌سازی خودرو,مواد شیمیایی,سمیت}, url = {https://www.ijche.ir/article_106524.html}, eprint = {https://www.ijche.ir/article_106524_26bf587494df00d1096b6386d02a4a09.pdf} } @article { author = {Zahedi, P. and Jamshidian, M. and Sohrabi, A. and Ghasemi, E.}, title = {Adsorption of Pb (II) from Aqueous Sample Using Nanocomposite Based on Polyethersulfone/Amine-Functionalized Carbon Nanotubes}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {53-65}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {Adsorption of lead metal ion [Pb(II)] from aqueous samples was investigated using polyethersulfone (PES)/amine-functionalized carbon nanotubes (NCNTs) via changes of pH, stirring speed, contact time, adsorbent content and initial metal ion concentration. The FTIR and EDX results for the modified sample showed that the first type amine groups (N-H2) and the second type amine groups (N-H) were located on the CNT surface. The SEM images also showed CNTs structure change, their breaking down followed by providing more order. The rate of ion adsorption by the nanocomposite sample showed that the kinetic equilibrium of adsorption occurred within the first 10 min of contact time. To maximize the metal ion removal, the amounts of nano-adsorbent, pH and initial ion concentration were determined 0.1 g/100 mL aqueous sample, 7, and 95 ppm, respectively. Also, the Freundlich isotherm model and the pseudo-second order kinetic model had the best correspondence with the experimental data.}, keywords = {Carbon nanotubes,Functionalization,Lead Metal Ion,polyethersulfone,Adsorption,Nanocomposite}, title_fa = {جذب یون سرب (2+) از نمونه آبی به وسیله نانوکامپوزیت پلی اتر سولفون/ نانولوله‌های کربنی آمین‌دار}, abstract_fa = {جذب سطحی یون فلز سرب (2+) از نمونه­های آبی به وسیله نانوکامپوزیت پلی اتر سولفون (PES)/نانولوله‌های کربنی (CNT) آمین‌دار‌شده با متغیرهای pH، سرعت همزن، زمان تماس، مقدار جاذب و غلظت اولیه یون فلزی بررسی شد. نتایج FTIR و EDX برای نمونه اصلاح‌شده نشان داد که گروه‌های آمینی نوع اول (N-H2) و نوع دوم (N-H) روی سطح CNT قرار گرفتند. همچنین عکس‌های SEM گویای تغییر ساختار CNT، شکسته شدن آن‌ها و به دنبال آن ایجاد نظم بیشتر بود. سرعت جذب یون به وسیله نمونه نانوکامپوزیت نشان داد که تعادل سینتیکی جذب در 10 دقیقه اول تماس رخ داده است. برای حذف بیشینه یون فلزی، مقادیر نانوجاذب برابر g 1/0 به ازای mL 100 نمونه آبی، pH محیط خنثی و غلظت اولیه یون ppm95 تعیین شد. همچنین مدل ایزوترم فرندلیچ و مدل سینتیکی شبه­ درجه‌دوم، بهترین همپوشانی را باداده­های آزمایشگاهی داشت.}, keywords_fa = {نانولوله‌های کربنی,عامل‌دار کردن,یون فلز سرب,پلی اتر سولفون,جذب سطحی,نانوکامپوزیت}, url = {https://www.ijche.ir/article_106525.html}, eprint = {https://www.ijche.ir/article_106525_353840807b13c61ef415b0a8c4cf8a8f.pdf} } @article { author = {Khezri, A. and Vafajoo, L. and Jokar, M.}, title = {The Cyanide Bio-Removal: Enzymatic Pathways Microorganisms and Affecting Operational Parameters}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {66-82}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {Cyanides uptake is one of the priorities of the wastewater treatment plants of the industry, because of its high toxicity and harmful effects on the environment. There are numerous physical and chemical methods for Cyanide removal, some of which are not cost-effective or create some hazardous side products. Thereby, utilizing the bio-removal processes as the cheap and bio-friendly method are taken into consideration. The Cyanide bio-removal proved to be the most effective method which possesses the possible removal pathways with the well-known enzymes. The present research aimed to investigate the Cyanids bio-removal pathways and to illustrate the most affecting operational parameters on this process. The information expressed in this article might be useful for some chemical engineers who work in industrial wastewater treatment facilities to assess the optimum operating conditions for Cyanids bio-uptake.}, keywords = {Cyanide,Biological uptake,Microorganism,Enzyme,Removal Pathways}, title_fa = {حذف بیولوژیکی سیانید: بررسی مسیرهای آنزیمی، ریزاندامگان‌‌ها و عامل‌های عملیاتی مؤثر}, abstract_fa = {حضور سیانید در فاضلاب صنایعی مانند واحد کک‌سازی صنایع فولاد، از معضلات زیست‌محیطی و حذف آن از اولویت‌های تصفیه‌خانه‌های فاضلاب صنعتی است. روش‌های فیزیکی و شیمیایی متنوعی برای حذف سیانید وجود دارد اما روش‌های بیولوژیکی به دلیل ارزان‌قیمت بودن و سازگاری با محیط زیست مورد توجه قرار گرفته است. به تازگی ریزاندامگان‌هایی شناخته شده که می‌توانند با کارایی بالا سیانید را حذف کنند؛ مزیت آن‌ها نیاز به زمان کمتر و وجود مسیرهای متنوع و آنزیم‌های شناخته‌شده است. هدف این پژوهش، بررسی اجمالی مسیرهای حذف بیولوژیکی ترکیبات سیانید و شناخت مهم‌ترین عامل‌های عملیاتی در این فرایندها است. اطلاعات ارائه‌شده در این مطالعه به مهندسان شیمی فعال در حوزه محیط زیست و به‌ویژه تصفیه‌خانه‌های فاضلاب‌های صنعتی آلوده به ترکیبات سیانید، کمک می‌کند تا برای حذف بیولوژیکی ترکیبات سیانید، شرایط عملیاتی مناسب را ایجاد کنند. }, keywords_fa = {}, url = {https://www.ijche.ir/article_106527.html}, eprint = {https://www.ijche.ir/article_106527_b37a214ee706dbc3e9a794714b27e363.pdf} } @article { author = {}, title = {English Abstracts}, journal = {Iranian Chemical Engineering Journal}, volume = {18}, number = {103}, pages = {85-87}, year = {2019}, publisher = {Iranian Association of Chemical Engineering}, issn = {1735-5400}, eissn = {2008-2797}, doi = {}, abstract = {}, keywords = {}, title_fa = {چکیده لاتین مقالات}, abstract_fa = {-}, keywords_fa = {}, url = {https://www.ijche.ir/article_132219.html}, eprint = {https://www.ijche.ir/article_132219_1d6959c6330e9141ac1d4a7d72c6b485.pdf} }